NuLEDs Compatibility

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
NuLEDs Compatibility2020-06-30T23:28:53+00:00

NuLEDs Compatibility

Added flexibility with NuLEDs technology

Many of ALW’s products are compatible with NuLEDs Power over Ethernet (PoE) technology – including the Commalite, LightPlane 2 Up+Under, and LightPlane 3.5. NuLEDs PoE intelligent controls plug into a standard Ethernet switch, and is controlled through management software by NuLEDs or one of their partners.

Wall switches and sensors plug into any fixture, and can control devices on the network. NuSPICE Architecture consists of the NuLEDs SPICEbox, peripheral wall controllers and sensors, and management software on a standard IEEE network.

Learn more about the NuLEDs technology below, along with some of our featured compatible products.

Contact our Inside Sales team at quotes@alwusa.com or the form on the right to get more information about how to add NuLEDs solutions to your ALW luminaires!

Get a Quote!

SPICEbox™

The future of the LED lighting industry has arrived with nuLEDs SPICEbox™, the PoE Control Module that delivers the power and management capabilities to your ALW’s LED luminaires. Each SPICEbox™ is a network device with a unique MAC address and IP address. SPICEboxes have multi-channel control for separate lighting loads, including color mixing. A SPICEbox™ can serve as a sensor host for wall switches, PIR sensors, ambient light sensors, or other sensors.

The SPICEbox™ is powered from the PoE switch through CAT5e or CAT6 cables, and provides up to 60Watts of 12-36VDC power to lighting fixtures over 2 or 4 wire connections. This makes the deployment of LED fixtures in a new installation or retrofit situation extremely flexible and adaptable. Without the need for conduits to carry solid copper cabling for high voltage power, the illumination of any environment can be delivered easily and efficiently.

LED lighting uses significantly less energy than conventional lighting and with the SPICEbox™ PoE LED solution, the cost of ownership is even lower. When integrated with ambient light and/or motion detectors, using the optional sensor ports, energy use and efficiency can be maximized to provide the lowest operating cost possible.

With a load capacity of 4 channels, the control module can provide RGBW or 4 channels of a single color to any lighting environment. Each channel can be controlled to provide customized lighting atmospheres to suit any situation. Whether you desire to have the mood of a room changed by adjusting the color temperature or you want to create a brighter environment, the ability is yours to change on the fly or automatically based on pre-set schedules.

Control of your lighting environment has now moved beyond a simple on/off or dimmer switch with the SPICEbox™ control module. Lighting environments can now be managed and adjusted by integrated room sensors or through management software that provides the ability to change colors, brightness, color temperature, etc., from any PC. mobile devices, or an unmanned event. In addition to controlling the lighting atmosphere, the control software also provides the ability to run diagnostics on any device or on the entire system. Management of the lighting system is now interactive and an invaluable tool.

With the application software, the control modules and associated devices transform the lighting system into a facility management tool that can be monitored, managed, and controlled to create the optimal lighting atmosphere for system users and facility occupants.

Configuring your PoE LED lighting system is flexible and adaptable when deploying the SPICEbox™ control module. Utilizing CAT5e or CAT6 cabling, the control module can be installed anywhere a network drop can be provided. Combined with wall controllers, ambient light sensors, or occupancy sensors, the lighting system can be tailored for any user and managed for maximum system performance.

Technical Specifications

Watts:Power Port up to 60 Watts
Power Supply:PoE, PoE+, UPOE
Input Voltage: 42 – 57 V DC
Output Voltage:12 – 36 V DC
Dimming:With NuLEDs NuSPICE
Sensor Ports:2
Load Configuration:4 Channels (RGBW or 4 Channels of Single Color)
Network Management:Cisco EnergyWise
Joulex Energy Manager
NuLEDs NuPAC
NuLEDs APPIO
Dimensions:6.5″ x 4.5″ x 1.5″
Mounting:Surface or Stand-alone
Wiring:CAT5e or CAT6 Ethernet Cable
Certifications & Code Requirements:UL Listed FCC Compliant
Typical Applications:Office Lighting
Commercial Lighting
Classroom Lighting
Campus Lighting
Enterprise Data Center

Featured Products

AQUA Round exterior sconces offer robust IP66 construction for harsh outdoor environments. The product family includes configurable lumen packages, precise optics ranging from 8-83 degree and optical accessories. AQUA is built using marine-grade aluminum, stainless steel hardware and tamper resistant metal reflectors. AQUA is available in up + down, down only and up only light distribution in 3.5”, 4.5” and 6” diameter, round and square shapes in either long and short lengths.

Tech Specs

Size:Diameter: 3.5″, 4.5″ or 6″ | Height (SX): 5″, 6.3″, or 6.1″ | Height (LX): 8.1″, 12.2″, or 15.4″
Mounting: Sconce – Direct, Indirect, or Direct + Indirect (Up+Down) distribution available
Lamping Source:Xicato XTM LED module – 2000 –  4000 lm
Power:Up to 34.2 W
Efficacy:Up to 160 lm/W
CCT:2700K, 3000K, 3500K, or 4000K
Color Consistency:1×2 SDCM (MacAdam Ellipse) along BBL
CRI:83 or 98
Driver Location:Integral – premium drivers must be remote
Dimming:0-10V or Phase Dimming to 10%; DALI and DMX to 0%; Lutron EcoSystem (5% or 1%); eldoLED to 0%
Reflector Options:AQUA 200/300: 10°, 20°, 40°, or 60°  | AQUA 400: 11° – 83° – optical accessories available
Environment:Listed for wet locations, tested to IP66 per IEC 60529
Material:Tamper-resistant design, stainless steel hardware, metal reflectors
Finish:Up to 16 standard finishes available – Marine-grade, special order & custom color matching also available
Weight:4lb. – 13.6lb. [1.8kg – 6.2kg]
Approvals:ETL Listed to UL 1598, 2108, 8750 and CSA C22.2# 9 & #250.0
Warranty:5 years
Commalite is an LED adjustable wall or ceiling fixture that provides effective interior wall and sign illumination. The compact, 3-1/4″ shade houses an integral driver, eliminating the need for remote mounting. A 2″ J-Box and cover dress plate are supplied with the fixture. The Commalite allows for 330 degrees of rotation and well as 90 degree cutoff illumination. An integral, 93% High Efficiency lens included with all Commalite Units.

Tech Specs

Aperture:3.25″ Shade
Length:Individual/Straight Run Section (min. 2ft.)
Mounting: Suspended or Stem Mount (6″ – 30″ Stem)
Lamping:White: 687 – 1145 lm/ft. | Decor: 335 lm/ft. | Tunable White: 763 lm/ft. | RGB and RGB+W
Power:5 – 13.5 W/ft.
Efficacy:Up to 85 lm/W
CCT:2700K / 3000K / 3500K / 4000K
CRI:80 or 90+
Lens:Lightweight High Transmission (HT) Flexible Lens (93% Efficiency)
Drivers/Dimming:0-10V to 5/1/0%; DALI and DMX to 0%; Lutron EcoSystem LDE5 (5%) & LDE1 (1%)
Driver Location:Remote
Control Systems:Lutron Vive, Enlighted, EldoLED, nLight, Osram, Philips, NuLEDs, and more. Contact ALW for more options.
Environment:Suitable for dry or damp locations
Construction:Extruded 6061 Aluminum
Finish:Up to 18 standard finishes available – Special order & custom color matching also available.
Approvals:ETL Listed to UL 2108 and CSA C22.2#250.0:2008 Ed. 3+G1;G2
Warranty:5 years, limited

CORE LX is the tall-shell version of the CORE series, with direct+indirect (up+down) options, and 5 flexible mounting types (including suspended pendant, surface mount, yoke, sconce, and catenary).

CORE features the latest LED technology from Xicato, with 1 x 2 MacAdams Ellipses color consistency and Corrected Cold Phosphor Technology in 83 and 98 CRI providing the highest quality of light guaranteed not to color shift over time.

All CORE fixtures are available in 2700K, 3000K, 3500K and 4000K CCT with up to 5,000 lumens of direct illumination or 8,000 lumens combined direct or indirect lighting. ADA-compliant option (C2LS model).

Tech Specs

Size:Diameter: 3.5″, 4.5″ or 6″ | Height: 8.1″, 12.2″, or 15.4″
Mounting: Suspended Pendant (P), Sconce (S), Surface Mount (M), or Yoke (Y) – Catenary Available
Lamping Source:Xicato XTM LED module – 700 –  5000 lm
Power:Up to 47 W
Efficacy:Up to 129 lm/W
CCT:2700K, 3000K, 3500K, or 4000K
Color Consistency:1×2 SDCM (MacAdam Ellipse)
CRI:83 or 98
Driver Location:Integrated – Remote or deep canopy options available
Dimming:0-10V to 10%; Phase Dimming to 1%; DALI and DMX to 0%; Lutron EcoSystem (5% or 1%)
Reflector Options:CORE 200/300: 20°, 40°, or 60°  | CORE 400: 11° – 83° – field replaceable without tools
Shell Cutouts:No – See Core CX
Environment:Listed for wet & damp locations
Material:CNC-machined aluminum with stainless steel hardware
Finish:Up to 17 standard finishes available – Special order & custom color matching also available
Weight:2lb. – 8lb. [0.9kg – 3.6kg]
Approvals:ETL Listed to UL 1598, 2108, 8750 and CSA C22.2# 9 & #250.0
Warranty:5 years

LightPlane 2 Up + Under is a compact and streamlined design with dual stacked 2.25″-tall channels with an exposed architectural seam. An extruded aluminum channel provides both direct and indirect illumination. Integral driver configuration with a reveal (drop) lens. LED. Individual or continuous row. ADA-Compliant wall mount available.

Tech Specs

Aperture:2″
Length:Individual/Straight Run Sections or Shapes w/ Mitered Corners
Mounting: Suspended or ADA-Compliant Wall Mount
LED Lamping:White: 675 – 1160 lm/ft. | Decor: 309 lm/ft. | Tunable White (2700K-6500K) | RGB or RGB+W
Distribution:Direct + Indirect – Standard Lambertian
Power:4.4 – 9.1 W/ft.
Efficacy:Up to 127 lm/W
CCT:2700K / 3000K / 3500K / 4000K
CRI:80 or 90+
Lens:Extra Diffuse Reveal (EXT/R) – Extruded, twin-layered, high-impact acrylic, dropped from fixture body.
Drivers/Dimming:0-10V to 5/1/0%; DALI and DMX to 0%; Lutron EcoSystem LDE5 (5%), LDE1 (1%), or T-Series
Driver Location:Integrated
Control Systems:Lutron Vive, Enlighted, EldoLED, nLight, Osram, Philips, NuLEDs, and more. Contact ALW for more options.
Environment:Suitable for dry or damp locations
Construction:Extruded 6063 Aluminum
Finish:18 standard finishes available – Special order & custom color matching also available.
Approvals:ETL Listed to UL 1598 and CSA C22.2#250.0:2008 Ed. 3+G1;G2
Warranty:5 years, limited

LightPlane 3.5 Recessed (LP3.5R) is a low-profile 3.5″ recessed slot LED fixture with an efficacy up to 115 lm/W. The LP3.5R can be installed both vertically and horizontally to form continuous or individual rows. Can be specified with both linear and LED downlights. The LP3.5R is available in recessed and perimeter mount with flush and regressed options as well as standard or asymmetric distribution.

Tech Specs

Aperture:1.5″ – Side-Emitting
Sizes:2ft., 3ft., or 4ft. diameter
Mounting: Stem-Mounted Pendant or Surface (Ceiling/Wall) Mount
LED Lamping:White: 1,547 – 3,201 lm (per ring) | RGB and RGB+W
Distribution:Direct (Side-Emitting)
Power:57 – 104W
CCT:2700K / 3000K / 3500K / 4000K
CRI:80+
Lens:Sandblasted clear lexan lens
Drivers/Dimming:0-10V to 5/1/0%; DMX to 0%; Lutron LTEA (TRIAC 2-Wire Phase Dimming)
Driver Location:Remote
Environment:Suitable for dry or damp locations
Construction:Extruded & Welded 6061 Aluminum
Finish:18 standard finishes available – Special order & custom color matching also available.
Approvals:ETL Listed to UL 2108 and CSA C22.2#250.0:2008 Ed. 3+G1;G2
Warranty:5 years, limited

MODO Duomo is part of the MODO family of specification-grade, LED luminaires – a collection of classic shapes and shades transformed into modern designs.

Combining form and function, MODO’s bold shapes include an array of configuration options and 17 standard colors, giving designers an architectural-grade lighting fixture that will capture their unique expression.

MODO luminaries go beyond traditional lighting to add accent and punctuation in locations where style is as important as performance: restaurants, hotel and corporate lobbies, markets, retail, and public gathering spaces.

Tech Specs

Size:Diameter (Shade): 10″ or 16″ | Height (Body): 4.6″ or 5.7″ | Height (Shade): 7″ or 11″
Mounting: Pendant – Direct or Direct + Indirect (Up+Down) distribution available
Lamping Source:Xicato XTM LED module – 720 –  4000 lm
Power:Up to 34.2 W
Efficacy:Up to 160 lm/W
CCT:2700K, 3000K, 3500K, or 4000K
Color Consistency:1×2 SDCM (MacAdam Ellipse) along BBL
CRI:83 or 98
Driver Location:Remote or Deep Canopy
Dimming:0-10V or Phase Dimming to 10%; DALI and DMX to 0%; Lutron EcoSystem (5% or 1%); eldoLED to 0%
Reflector Options:Small: 20°, 40°, or 60°  | AQUA 400: 11° – 83° – field adjustable w/o tools. Optical accessories available.
Environment:Listed for dry or damp locations
Material:CNC-machined aluminum with stainless steel hardware
Finish:Up to 16 standard finishes available (optional 2-tone) – Special order & custom color matching also available
Weight:2.8lb. – 6.8lb. [1.3kg – 3.1kg]
Approvals:ETL Listed to UL 1598, 2108, 8750 and CSA C22.2# 9 & #250.0
Warranty:5 years

SuperPlane 2.5 (SP2.5) is the next generation of LightPlane reinvented from the ground up. The SP2.5 offers seamless illumination up to 250 feet, energy-saving performance up to 159 lm/W, a no-glare UGR rating of 10 in typical applications and multiple output options up to 1200 lm/ft all from a 2.5″-wide lensed form.

The SP2.5 delivers direct and indirect illumination with a standard Lambertian distribution via the optically engineered ControlRoll lens, which eliminates lens gaps common to traditional, continuous linear runs by providing seamless illumination while dynamically controlling output.

The SP2.5 also offers a wide array of LED lamping options – 2700k, 3000K, 3500K or 4000K  with 80+ or 90+ CRI, 2700K-6500K Tunable White, color-changing RGB and RGB+White. ADA-Compliant wall mount available.

Tech Specs

Aperture:2.5″
Length:Individual/Straight Run Sections or Shapes w/ Mitered Corners – up to 250ft. seamless illumination
Mounting: Suspended, Surface (Back) Mount, or Wall Mount
LED Lamping:(Direct) Linear White: 300 – 1200 lm/ft. | Tunable White: 2700K – 6500K | RGB and RGB+W
Distribution:Direct, Indirect, or Direct+Indirect – Standard Lambertian | Optional Batwing Indirect available
Power:2.4 – 9.2 W/ft.
Efficacy:Up to 130 lm/W (159 lm/W for indirect batwing)
CCT:2700K / 3000K / 3500K / 4000K
CRI:80 or 90+
Lens:ControlRoll Optics – Seamless illumination up to 250ft. – Rolls out and snaps into housing
Indirect Batwing Optic also available (currently not compatible with ControlRoll)
Drivers/Dimming:0-10V to 5/1/0%; DALI and DMX to 0%; Lutron EcoSystem LDE5 (5%), LDE1 (1%), or T-Series
Driver Location:Integrated
Control Systems:Lutron Vive, Enlighted, EldoLED, nLight, Osram, Philips, and more. Contact ALW for more options.
Environment:Suitable for dry or damp locations
Construction:Extruded 6061 Aluminum
Finish:17 standard finishes available – Special order & custom color matching also available.
Approvals:ETL Listed to UL 1598 and CSA C22.2#250.0:2008 Ed. 3+G1;G2
Warranty:5 years, limited

TUBE SX is the short-bodied luminous TUBE option, made with the same robust material and construction as CORE and QUBE with the addition of durable Satinice acrylic tubing. TUBE fixtures are available as multiple fixture types and customer-specified lengths up to 94”.

All TUBE fixtures are available in 2700K, 3000K, 3500K and 4000K CCT with up to 4,000 lumens of direct illumination. ADA-compliant option (T2SS model).

Tech Specs

Size:Diameter: 3″, 4″ or 6″ | Body Height:  5″, 5.5″, or 6.1″ | Lens Height: Customizable (up to 94″)
Mounting: Suspended Pendant (P), Sconce (S), or Surface Mount (M) – Catenary Available
Lamping Source:Xicato XTM LED module – 700 –  4000 lm
Power:Up to 39 W
Efficacy:Up to 129 lm/W
CCT:2700K, 3000K, 3500K, or 4000K
Color Consistency:1×2 SDCM (MacAdam Ellipse)
CRI:83 or 98
Driver Location:Integrated – Remote or deep canopy options available
Dimming:0-10V or Phase Dimming to 10% or 1%; eldoLED, DALI, and DMX to 0%; Lutron EcoSystem (5% or 1%)
Environment:Listed for wet & damp locations
Material:CNC-machined aluminum with stainless steel hardware – Satinice acrylic diffuser
Finish:Up to 17 standard finishes available – Special order & custom color matching also available
Weight:1.6lb. – 7lb. [0.7kg – 3.2kg]
Approvals:ETL Listed to UL 1598, 2108, 8750 and CSA C22.2# 9 & #250.0
Warranty:5 years

Finish Options

Choose from 18 Standard ALW finishes with no cost adder, or hundreds more from the TCI and Tiger Drylac Catalogs for a minimal setup fee. For added flexibility, we offer custom color matching for a premium setup fee. Fill out the Quote Request form for more details!

Basic Powder Coat

Gloss White

Satin White
Antimicrobial
Satin White

Textured Matte White

Textured Matte Black

Satin Anodized Effect Powder Coat

Clear Silver

Oil-Rubbed Bronze

Dark Bronze

Satin Black

Metallic Powder Coat

Silver Gray

Charcoal Gray

Copper

Brass

Gloss Powder Coat (80-95% Gloss)

Orange
(RAL 1028)

Red
(RAL 3020)

Magenta
(RAL 4010)

Blue
(RAL 5015)

Aluminum

Anodized Aluminum

1
Introducing The Wellness Collection - Human-Centric lighting & acoustic solutions designed for the WELL Building Standard™. Learn More